/* Class = "NSTextFieldCell"; title = "• Zero configuration required\n• Surge automatically chooses the most appropriate channel to establish connections.\n• Always end-to-end encryption. And encryption keys are synchronized via your iCloud.\n• None of your data passes through third-party servers, except the proxy server if you choose."; ObjectID = "7Cv-DO-W0V"; */
"7Cv-DO-W0V.title" = "• 无需配置\n• Surge自动选择最合适的通道建立连接。\n• 始终端到端加密。加密密钥通过iCloud同步。\n• 您的数据不经过第三方服务器，除非您选择使用代理服务器。";

/* Class = "NSTextFieldCell"; title = "→"; ObjectID = "7dz-dV-LFP"; */
"7dz-dV-LFP.title" = "→";

/* Class = "NSTextFieldCell"; title = "Please choose a name for the current device. The name is case insensitive. Different names must be used for different devices."; ObjectID = "36p-oM-SBC"; */
"36p-oM-SBC.title" = "请为当前设备选择一个名称。名称不区分大小写。不同的设备必须使用不同的名称。";

/* Class = "NSTextFieldCell"; title = "Ponte Service Port"; ObjectID = "amb-bt-BVo"; */
"amb-bt-BVo.title" = "Ponte 服务端口";

/* Class = "NSMenuItem"; title = "Item 2"; ObjectID = "BEB-je-ZpL"; */
"BEB-je-ZpL.title" = "Item 2";

/* Class = "NSMenuItem"; title = "Item 3"; ObjectID = "CJw-NF-LHg"; */
"CJw-NF-LHg.title" = "Item 3";

/* Class = "NSTextFieldCell"; title = "6208"; ObjectID = "dF1-0F-Pt7"; */
"dF1-0F-Pt7.title" = "6208";

/* Class = "NSTextFieldCell"; title = "Surge Ponte is a private mesh network between your devices running Surge Mac & iOS."; ObjectID = "dTo-bA-bGC"; */
"dTo-bA-bGC.title" = "Surge Ponte 是运行 Surge Mac 和 iOS 的设备之间的私有 Mesh 网络。";

/* Class = "NSTextFieldCell"; title = "192.168.20.75"; ObjectID = "jPX-LG-SHC"; */
"jPX-LG-SHC.title" = "192.168.20.75";

/* Class = "NSTextFieldCell"; title = "Add the following port forwarding rule in your router:"; ObjectID = "Jxo-rH-kHn"; */
"Jxo-rH-kHn.title" = "在您的路由器中添加以下端口转发规则：";

/* Class = "NSTextFieldCell"; title = "If checked, all your devices in the same iCloud account can view the request list and modify settings on this device remotely via Surge Ponte from anywhere."; ObjectID = "kf8-FL-zpQ"; */
"kf8-FL-zpQ.title" = "如果选中，所有在同一iCloud账户下的设备都可以通过Surge Ponte从任何地方查看请求列表并远程修改此设备的设置。";

/* Class = "NSTextFieldCell"; title = "External Port"; ObjectID = "khn-rI-qLY"; */
"khn-rI-qLY.title" = "外部端口";

/* Class = "NSTextFieldCell"; title = "Device Name:"; ObjectID = "lUd-CW-Lt7"; */
"lUd-CW-Lt7.title" = "设备名称：";

/* Class = "NSTextFieldCell"; title = ":"; ObjectID = "MKD-PH-P0y"; */
"MKD-PH-P0y.title" = ":";

/* Class = "NSButtonCell"; title = "Read Setup Guide…"; ObjectID = "nmO-P1-Yn2"; */
"nmO-P1-Yn2.title" = "阅读配置指引…";

/* Class = "NSTextFieldCell"; title = "UDP"; ObjectID = "oOg-UP-SHw"; */
"oOg-UP-SHw.title" = "UDP";

/* Class = "NSButtonCell"; title = "Allow remote controller by other devices via Surge Ponte"; ObjectID = "PTn-ai-ZD4"; */
"PTn-ai-ZD4.title" = "允许其他设备通过 Surge Ponte 远程控制";

/* Class = "NSTextFieldCell"; title = "Relay Proxy:"; ObjectID = "px1-cy-rIt"; */
"px1-cy-rIt.title" = "中继代理：";

/* Class = "NSTextFieldCell"; placeholderString = "Device Name"; ObjectID = "rnI-no-nN5"; */
"rnI-no-nN5.placeholderString" = "设备名称";

/* Class = "NSMenuItem"; title = "Item 1"; ObjectID = "w5P-kw-c2Y"; */
"w5P-kw-c2Y.title" = "项目1";

/* Class = "NSTextFieldCell"; title = "You can choose any unused port number as an external port number, see the router manual for specific restrictions."; ObjectID = "wnk-30-JWx"; */
"wnk-30-JWx.title" = "您可以选择任何未使用的端口号作为外部端口号，具体限制请参阅路由器手册。";

/* Class = "NSTextFieldCell"; title = "• Please select a proxy policy as the relay server. The proxy must support UDP relay and have a public IP address or be behind a full cone NAT. Surge will confirm it for you after you select it.\n• You may select a policy group, but it's not recommended because it's uncertain which proxy will be used. If an unqualified proxy is selected, Surge Ponte won't work."; ObjectID = "wuE-yd-tfl"; */
"wuE-yd-tfl.title" = "• 请选择一个代理策略作为中继服务器。代理必须支持UDP中继，并且具有公共IP地址或位于完全锥形NAT后面。选择后，Surge将为您确认。\n• 您可以选择一个策略组，但不推荐这样做，因为不确定将使用哪个代理。如果选择了不合格的代理，Surge Ponte将无法工作。";

/* Class = "NSTextFieldCell"; title = "Current Device IP"; ObjectID = "ZKa-ks-etV"; */
"ZKa-ks-etV.title" = "当前设备 IP";

